Announcement

Collapse
No announcement yet.

★★Infinity Chinese Miracle-2 Successfully Unlocked / Repaired / Flashed Phones ★★ ��

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ★★Infinity Chinese Miracle-2 Successfully Unlocked / Repaired / Flashed Phones ★★ ��


    Infinity Chinese Miracle-2 Successfully Unlocked / Repaired / Flashed Phones !!!





    [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

  • #2
    SmartAV Init Ok!__Primo_NF+__Primo_NF+__4.4.2

    Wait for phone...
    Phone found! [ 3 ]
    Sync...
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v7.1533.03
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 90014A4838473264040503A2D3A3A163
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now ...
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0090 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , d2G8
    [eMMC] : FLASH_CID : 90014A4838473264040503A2D3A3A163
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB
    INT RAM : 0x00020000
    EXT RAM : 0x40000000
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    SmartAV Init Ok!
    Scanning FileSystem now , please wait
    Scan Done, infected files found : 11
    Removing infected files and scripts ...
    [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

    Comment


    • #3
      Smile Sucesfully Unlocked Benq S660C RIPCURL with Infinity Box

      The only difficult step was make the cable. Maybe the TXT in the Infinity Box Shell is not too easy to undersatand. But the cable is very simple. Changing the pinout of Motorola T190 Cable.
      The Unlock Process?????? Very easy, Infinity always work!!!!!!!!!!!!

      Here is the Log:

      COM5 [VCP0] selected
      modulo v1.37
      Device: BenQ-S660C
      Checkeando datos, espere...
      Action: unlock
      Boot...
      El Telefono deberia estar APAGADO !
      Presiona boton POWER Ahora !
      Connecting...
      Boot Done
      Check Connection...
      Check Connection Done
      Set Baud...
      812500
      Set Baud Done
      Check Flash...
      error: Probably wrong model selected.
      Continue anyway ?
      Check Flash Done
      Check Parameters...
      Flash: 0089:88C500010001
      Archivo guardado: C:\Archivos de

      programa\InfinityBox\BModule\eeprom-00_20090325-021655.78F.bin
      Archivo guardado: C:\Archivos de

      programa\InfinityBox\BModule\eeprom-01_20090325-021659.78F.bin
      Archivo guardado: C:\Archivos de

      programa\InfinityBox\BModule\eeprom-02_20090325-021703.78F.bin
      Check Parameters Done
      Check Space...
      Flash: 0089:88C500010001
      flash: Intel I28F320C3B-B B 4Mb
      Check Space Done
      Check Data...
      Check Data Done
      Erasing...
      erase operation not required
      Erasing Done
      Writing...
      Flash: 0089:88C500010001
      Flash: 0089:88C500010001
      Flash: 0089:88C500010001
      Writing Done
      Finished, time used: 35 sec
      Quite/coloque la bateria ahora !
      [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

      Comment


      • #4
        SmartAV W125--ok

        Card found : S/N : 5AC06F78 , v0129
        Chinese Miracle II [MTK module] v 1.38

        Operation : Remove Viruses [SmartAV] [ v1.38 ]
        SmartAV Conf : 100/80/2000

        1. Power Off Phone , Remove battery , Insert back
        2. Insert USB cable. In some cases require hold BootKey

        Wait for phone...
        Phone found! [ 24 ]
        Sync...
        Inital regs read done
        Boot Info :
        BB_CPU_ID : 6583
        BB_CPU_HW : CA01
        BB_CPU_SW : 8A00
        BB_CPU_SB : 0001
        BB_CPU_NM : [MediaTek] MT6583|6589_S00
        Processing BROM stage
        SecCfgVal : 0x00000000
        BromVersion : 0xFF
        BLVersion : 0x01
        Preloader Status : Alive
        Processing DA stage
        DA Select done , sending
        DA Ver : MTK_AllInOne_DA_v7.1533.03
        NAND_ID : 00000000000000000000000000000000
        eMMC_ID : 4B0001153030534AEE58034D3131757E
        DA Stat : v3.2 on BBID : 0x86
        DA Sent. Configure setting now ...
        DA started successuflly
        eMMC FlashIC initialized
        [eMMC] : FLASH_VEN : 0015 , OEM : 0100
        [eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
        [eMMC] : FLASH_CID : 1501004B4A5330304D0358EE7E753131
        [eMMC] : FLASH_EXT : 0x00100000 , 0x00100000 , 0x00020000
        [eMMC] : FLASH_LEN : 0x00000000E9000000
        [eMMC] : FLASH_UCP : 3728 MiB
        INT RAM : 0x00020000
        EXT RAM : 0x40000000
        BOOT TYPE : EMMC_FLASH_BOOT
        SOC VERIFY : C1
        Boot Ok!

        SmartAV Init Ok!
        Scanning FileSystem now , please wait
        Scan Done, infected files found : 1
        Removing infected files and scripts ...

        SmartAV Report : Removed 1 infected files!

        Making additional operations ...
        Special Op #1 : Clear Recovery Data Ok!
        Special Op #2 : PostFix Ok!

        Done!

        Done!
        Elapsed: 00:00:46
        Reconnect Power/Cable!
        [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

        Comment


        • #5
          Symphony w125
          Read Factory File !


          [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

          Comment


          • #6
            W69q -MT-6582 SmartAV OK

            W69q -MT-6582 SmartAV OK



            Card found : S/N : 5AC06F78 , v0129
            Chinese Miracle II [MTK module] v 1.38

            Operation : Remove Viruses [SmartAV] [ v1.38 ]
            SmartAV Conf : 100/80/2000

            1. Power Off Phone , Remove battery , Insert back
            2. Insert USB cable. In some cases require hold BootKey

            Wait for phone...
            Phone found! [ 3 ]
            Sync...
            Inital regs read done
            Boot Info :
            BB_CPU_ID : 6582
            BB_CPU_HW : CA01
            BB_CPU_SW : 8A00
            BB_CPU_SB : 0001
            BB_CPU_NM : [MediaTek] MT6582_S00
            Processing BROM stage
            SecCfgVal : 0x00000000
            BromVersion : 0xFF
            BLVersion : 0x01
            Preloader Status : Alive
            Processing DA stage
            DA Select done , sending
            DA Ver : MTK_AllInOne_DA_v7.1533.03
            NAND_ID : 00000000000000000000000000000000
            eMMC_ID : 90014A4834473164040500A19E7051CD
            DA Stat : v4.2 on BBID : 0x87
            DA Sent. Configure setting now ...
            DA started successuflly
            eMMC FlashIC initialized
            [eMMC] : FLASH_VEN : 0090 , OEM : 014A
            [eMMC] : FLASH_INF : [HYNIX] , d1G4
            [eMMC] : FLASH_CID : 90014A4834473164040500A19E7051CD
            [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
            [eMMC] : FLASH_LEN : 0x00000000E9000000
            [eMMC] : FLASH_UCP : 3728 MiB
            INT RAM : 0x00020000
            EXT RAM : 0x20000000
            BOOT TYPE : EMMC_FLASH_BOOT
            SOC VERIFY : C1
            Boot Ok!
            [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

            Comment


            • #7
              Symphony W65 Bin File Read

              Symphony W65 Bin File Read



              Card found : S/N : 5AC06F78 , v0129
              Chinese Miracle II [MTK module] v 1.38

              Operation : Read Flash [ v1.38 ]

              1. Power Off Phone , Remove battery , Insert back
              2. Insert USB cable. In some cases require hold BootKey

              Wait for phone...
              Phone found! [ 3 ]
              Sync...
              Inital regs read done
              Boot Info :
              BB_CPU_ID : 6572
              BB_CPU_HW : CA01
              BB_CPU_SW : 8A00
              BB_CPU_SB : 0000
              BB_CPU_NM : [MediaTek] MT6572_S00
              Processing BROM stage
              BLVersion : 0x01
              SecCfgVal : 0x00000000
              BromVersion : 0xFF
              BLVersion : 0x01
              Preloader Status : Alive
              Processing DA stage
              DA Select done , sending
              DA Ver : MTK_AllInOne_DA_v7.1533.03
              NAND_ID : 00AD00BC00900055005600AD00BC0000
              eMMC_ID : 00000000000000000000000000000000
              DA Stat : v4.2 on BBID : 0x88
              DA Sent. Configure setting now ...
              DA started successuflly
              NAND FlashIC initialized
              [NAND] : FLASH_VEN : 0x009A , [Hynix] H9TA4GH2GDMCPR
              [NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0056 00AD 00BC
              [NAND] : FLASH_LEN : 0x20000000
              [NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
              INT RAM : 0x00020000
              EXT RAM : 0x10000000
              BOOT TYPE : NAND_FLASH_BOOT
              SOC VERIFY : C1
              Boot Ok!

              Reading Flash Conent now ...

              [Read Ok] : preloader_huaqin72_we_iba_lca.bin
              [Read Ok] : lk.bin
              [Read Ok] : boot.img
              [Read Ok] : recovery.img
              [Read Ok] : secro.img
              [Read Ok] : logo.bin
              [Read Ok] : system.img
              [Read Ok] : cache_empty.img
              [Read Ok] : usrdata_empty.img

              [ScatCFG] : MT6572 / V1.1.1 / huaqin72_we_iba_lca / NAND
              FW Size : 298 MiB
              Scatter saved to : C:\Users\nt\Desktop\W65\MT6572__NAND__huaqin72_we_ iba_lca

              Done!
              Elapsed: 00:05:06
              Reconnect Power/Cable!
              [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

              Comment


              • #8
                X-BO V3+ -MT-6572- Format

                X-BO V3+ -MT-6572- Format


                [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

                Comment


                • #9
                  W68Q MT-6582 Scatter File Read

                  W68Q MT-6582 Scatter File Read


                  Card found : S/N : 5AC06F78 , v0129
                  Chinese Miracle II [MTK module] v 1.38

                  Operation : Read Flash [ v1.38 ]

                  1. Power Off Phone , Remove battery , Insert back
                  2. Insert USB cable. In some cases require hold BootKey

                  Wait for phone...
                  Device boot not done
                  Check Drivers
                  Try again

                  Boot Error!

                  Operation Failed
                  Elapsed: 00:00:31
                  Reconnect Power/Cable!


                  Operation : Read Flash [ v1.38 ]

                  1. Power Off Phone , Remove battery , Insert back
                  2. Insert USB cable. In some cases require hold BootKey

                  Wait for phone...
                  Phone found! [ 3 ]
                  Sync...
                  Inital regs read done
                  Boot Info :
                  BB_CPU_ID : 6582
                  BB_CPU_HW : CA01
                  BB_CPU_SW : 8A00
                  BB_CPU_SB : 0001
                  BB_CPU_NM : [MediaTek] MT6582_S00
                  Processing BROM stage
                  SecCfgVal : 0x00000000
                  BromVersion : 0xFF
                  BLVersion : 0x01
                  Preloader Status : Alive
                  Processing DA stage
                  DA Select done , sending
                  DA Ver : MTK_AllInOne_DA_v7.1533.03
                  NAND_ID : 00000000000000000000000000000000
                  eMMC_ID : 1501004E35585A4D42012261CA0A5143
                  DA Stat : v4.2 on BBID : 0x87
                  DA Sent. Configure setting now ...
                  DA started successuflly
                  eMMC FlashIC initialized
                  [eMMC] : FLASH_VEN : 0015 , OEM : 0100
                  [eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
                  [eMMC] : FLASH_CID : 1501004E35585A4D42012261CA0A5143
                  [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
                  [eMMC] : FLASH_LEN : 0x00000000E9000000
                  [eMMC] : FLASH_UCP : 3728 MiB
                  INT RAM : 0x00020000
                  EXT RAM : 0x20000000
                  BOOT TYPE : EMMC_FLASH_BOOT
                  SOC VERIFY : C1
                  Boot Ok!

                  Reading Flash Conent now ...

                  Brand : Symphony
                  ProdName : Symphony W68Q
                  ProdModel : Symphony W68Q
                  Device : W68Q
                  AndroidVer: 4.4.2
                  MTKxCPU : MT6582
                  MTKxPRJ : 2014-07-28 15:56:40

                  [Read Ok] : preloader_konka82_i120q_kk.bin
                  [Read Ok] : MBR
                  [Read Ok] : EBR1
                  [Read Ok] : lk.bin
                  [Read Ok] : boot.img
                  [Read Ok] : recovery.img
                  [Read Ok] : secro.img
                  [Read Ok] : logo.bin
                  [Read Ok] : EBR2
                  [Read Ok] : system.img
                  [Read Ok] : cache.img
                  [Read Ok] : userdata.img
                  [Read Ok] : fat.img

                  [ScatCFG] : MT6582 / V1.1.1 / konka82_i120q_kk / EMMC
                  FW Size : 989 MiB
                  Scatter saved to : C:\Users\nt\Desktop\MT6582__Symphony__Symphony_W68 Q__W68Q__4.4.2__2014-07-28_155640\

                  All done!

                  Done!
                  Elapsed: 00:04:50
                  Reconnect Power/Cable!

                  [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

                  Comment


                  • #10
                    Used to Smart AV

                    Used to Smart AV


                    [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

                    Comment


                    • #11
                      ZIII__Symphony__4.2.2 [SmartAV]




                      Card found : S/N : 5AC06F78 , v0129
                      Chinese Miracle II [MTK module] v 1.38

                      Operation : Remove Viruses [SmartAV] [ v1.38 ]
                      SmartAV Conf : 100/80/2000

                      1. Power Off Phone , Remove battery , Insert back
                      2. Insert USB cable. In some cases require hold BootKey

                      Wait for phone...
                      Phone found! [ 3 ]
                      Sync...
                      Inital regs read done
                      Boot Info :
                      BB_CPU_ID : 6592
                      BB_CPU_HW : CA00
                      BB_CPU_SW : 8A00
                      BB_CPU_SB : 0000
                      BB_CPU_NM : [MediaTek] MT6592_S00
                      Processing BROM stage
                      BLVersion : 0x01
                      SecCfgVal : 0x00000000
                      BromVersion : 0xFF
                      BLVersion : 0x01
                      Preloader Status : Alive
                      Processing DA stage
                      DA Select done , sending
                      DA Ver : MTK_AllInOne_DA_v7.1533.03
                      NAND_ID : 00000000000000000000000000000000
                      eMMC_ID : 1501004B385530304D03F69F88E2218D
                      DA Stat : v4.2 on BBID : 0x8A
                      DA Sent. Configure setting now ...
                      DA started successuflly
                      eMMC FlashIC initialized
                      [eMMC] : FLASH_VEN : 0015 , OEM : 0100
                      [eMMC] : FLASH_INF : [SAMSUNG] , M00U8
                      [eMMC] : FLASH_CID : 1501004B385530304D03F69F88E2218D
                      [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
                      [eMMC] : FLASH_LEN : 0x00000003A3E00000
                      [eMMC] : FLASH_UCP : 14910 MiB
                      INT RAM : 0x00020000
                      EXT RAM : 0x40000000
                      BOOT TYPE : EMMC_FLASH_BOOT
                      SOC VERIFY : C1
                      Boot Ok!

                      SmartAV Init Ok!
                      Scanning FileSystem now , please wait
                      Scan Done, infected files found : 1
                      Removing infected files and scripts ...

                      SmartAV Report : Removed 1 infected files!

                      Making additional operations ...
                      Special Op #1 : Clear Recovery Data Ok!
                      Special Op #2 : PostFix Ok!

                      Done!

                      Done!
                      Elapsed: 00:01:06
                      Reconnect Power/Cable!


                      [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

                      Comment


                      • #12

                        Symphony_ZIII_Formate_Done!

                        1. Power Off Phone , Remove battery , Insert back
                        2. Insert USB cable. In some cases require hold BootKey

                        Wait for phone...
                        Phone found! [ 3 ]
                        Sync...
                        Inital regs read done
                        Boot Info :
                        BB_CPU_ID : 6592
                        BB_CPU_HW : CA00
                        BB_CPU_SW : 8A00
                        BB_CPU_SB : 0000
                        BB_CPU_NM : [MediaTek] MT6592_S00
                        Processing BROM stage
                        BLVersion : 0x01
                        SecCfgVal : 0x00000000
                        BromVersion : 0xFF
                        BLVersion : 0x01
                        Preloader Status : Alive
                        Processing DA stage
                        DA Select done , sending
                        DA Ver : MTK_AllInOne_DA_v7.1533.03
                        NAND_ID : 00000000000000000000000000000000
                        eMMC_ID : 1501004B385530304D03F69F88E2218D
                        DA Stat : v4.2 on BBID : 0x8A
                        DA Sent. Configure setting now ...
                        DA started successuflly
                        eMMC FlashIC initialized
                        [eMMC] : FLASH_VEN : 0015 , OEM : 0100
                        [eMMC] : FLASH_INF : [SAMSUNG] , M00U8
                        [eMMC] : FLASH_CID : 1501004B385530304D03F69F88E2218D
                        [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
                        [eMMC] : FLASH_LEN : 0x00000003A3E00000
                        [eMMC] : FLASH_UCP : 14910 MiB
                        INT RAM : 0x00020000
                        EXT RAM : 0x40000000
                        BOOT TYPE : EMMC_FLASH_BOOT
                        SOC VERIFY : C1
                        Boot Ok!


                        Clear USERDATA
                        Clear Ok!
                        Clear CACHE
                        Clear Ok!

                        Done!
                        Elapsed: 00:00:20
                        Reconnect Power/Cable!
                        [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

                        Comment


                        • #13
                          Symphony H60 1000000% OK google (FRP)
                          DONE



                          [IMG]http://gsmsociety.com/image.php?type=sigpic&userid=5&dateline=1459607545[/IMG] [COLOR=Cyan][B][FONT=Comic Sans MS][SIZE=4]Niaz Ahmed[/SIZE][/FONT][/B][/COLOR]

                          Comment


                          • #14
                            Symphony P7 6.0 Reset Privacy Lock Done By Cm2


                            Code:
                            Operation : Reset Privacy Lock [ v1.58 ]
                            
                            1. Power Off Phone , Remove battery , Insert back
                            2. Insert USB cable. In some cases require hold BootKey
                            
                            Wait for phone...
                            Phone found! [ 16 ]
                            Sync...
                            Inital Boot Ok!
                            BB_CPU_PID : 6580
                            BB_CPU_NME : [MediaTek] MT6580_S00
                            BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
                            Processing BROM stage
                            Settings for BROM configured!
                            SecCfgVal : 0x00000000
                            BromVer   : 0x00FF
                            BLVersion : 0x0001
                            PreLoader : Active [ Boot with PL ]
                            BootLdrSS : NORMAL with PRELOADER
                            Processing DA stage
                            DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
                            Sending and initialize DA ...
                            Running DA ver.4.2 on BBID : 0x94
                            NAND Flash : NOT INSTALLED
                            eMMC Flash : 150100513832334D42000FD7D4BBA3BD
                            Initialize Memory ... 
                            DRAM already initialized by Preloader
                            DAgent sent , init HW now
                            eMMC FlashIC initialized
                            [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
                            [eMMC] : FLASH_INF : [SAMSUNG] , BM328
                            [eMMC] : FLASH_CID : 150100513832334D42000FD7D4BBA3BD
                            [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
                            [eMMC] : FLASH_LEN : 0x00000003A3E00000
                            [eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
                            DEV RID    : 0xDA9F1AB70A0E885D60B7D6B4A075BD12
                            INT RAM    : 0x00020000
                            EXT RAM    : 0x80000000 [2 GiB]
                            BOOT TYPE  : EMMC_FLASH_BOOT
                            SOC VERIFY : C1
                            Boot Ok!
                            
                            Checking data ... 
                            
                            Process block #1
                            Process block #2
                            
                            Privacy Lock reset Ok!
                            
                            Done!
                            Elapsed: 00:00:28
                            Reconnect Power/Cable!

                            Comment


                            • #15
                              Symphony P7 6.0 Clear All lock


                              Code:
                              Operation : Check / Read Info [ v1.58 ]
                              
                              1. Power Off Phone , Remove battery , Insert back
                              2. Insert USB cable. In some cases require hold BootKey
                              
                              Wait for phone...
                              Phone found! [ 16 ]
                              Sync...
                              Inital Boot Ok!
                              BB_CPU_PID : 6580
                              BB_CPU_NME : [MediaTek] MT6580_S00
                              BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
                              Processing BROM stage
                              Settings for BROM configured!
                              SecCfgVal : 0x00000000
                              BromVer   : 0x00FF
                              BLVersion : 0x0001
                              PreLoader : Active [ Boot with PL ]
                              BootLdrSS : NORMAL with PRELOADER
                              Processing DA stage
                              DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
                              Sending and initialize DA ...
                              Running DA ver.4.2 on BBID : 0x94
                              NAND Flash : NOT INSTALLED
                              eMMC Flash : 150100513832334D42000FD7D4BBA3BD
                              Initialize Memory ... 
                              DRAM already initialized by Preloader
                              DAgent sent , init HW now
                              eMMC FlashIC initialized
                              [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
                              [eMMC] : FLASH_INF : [SAMSUNG] , BM328
                              [eMMC] : FLASH_CID : 150100513832334D42000FD7D4BBA3BD
                              [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
                              [eMMC] : FLASH_LEN : 0x00000003A3E00000
                              [eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
                              DEV RID    : 0xDA9F1AB70A0E885D60B7D6B4A075BD12
                              INT RAM    : 0x00020000
                              EXT RAM    : 0x80000000 [2 GiB]
                              BOOT TYPE  : EMMC_FLASH_BOOT
                              SOC VERIFY : C1
                              Boot Ok!
                              
                              [AP] : Initial info read Ok!
                              
                              Brand     : Symphony
                              ProdName  : P7
                              ProdModel : Symphony P7
                              Device    : P7
                              AndroidVer: 6.0
                              MTKxCPU   : MT6580
                              MTKxPRJ   : M3679_DM36794_SYMPHONY-P7_L105
                              
                              Done!
                              Elapsed: 00:00:06
                              Reconnect Power/Cable!
                              
                              
                              
                              Operation : Format FileSystem [ v1.58 ]
                              
                              1. Power Off Phone , Remove battery , Insert back
                              2. Insert USB cable. In some cases require hold BootKey
                              
                              Wait for phone...
                              Phone found! [ 16 ]
                              Sync...
                              Inital Boot Ok!
                              BB_CPU_PID : 6580
                              BB_CPU_NME : [MediaTek] MT6580_S00
                              BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
                              Processing BROM stage
                              Settings for BROM configured!
                              SecCfgVal : 0x00000000
                              BromVer   : 0x00FF
                              BLVersion : 0x0001
                              PreLoader : Active [ Boot with PL ]
                              BootLdrSS : NORMAL with PRELOADER
                              Processing DA stage
                              DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
                              Sending and initialize DA ...
                              Running DA ver.4.2 on BBID : 0x94
                              NAND Flash : NOT INSTALLED
                              eMMC Flash : 150100513832334D42000FD7D4BBA3BD
                              Initialize Memory ... 
                              DRAM already initialized by Preloader
                              DAgent sent , init HW now
                              eMMC FlashIC initialized
                              [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
                              [eMMC] : FLASH_INF : [SAMSUNG] , BM328
                              [eMMC] : FLASH_CID : 150100513832334D42000FD7D4BBA3BD
                              [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
                              [eMMC] : FLASH_LEN : 0x00000003A3E00000
                              [eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
                              DEV RID    : 0xDA9F1AB70A0E885D60B7D6B4A075BD12
                              INT RAM    : 0x00020000
                              EXT RAM    : 0x80000000 [2 GiB]
                              BOOT TYPE  : EMMC_FLASH_BOOT
                              SOC VERIFY : C1
                              Boot Ok!
                              
                              
                              Clear FRP ( Google Reset Protection )
                              Clear Ok!
                              Clear DIN
                              Clear Ok!
                              Clear USERDATA
                              Clear Ok!
                              Clear CACHE
                              Clear Ok!
                              
                              Done!
                              Elapsed: 00:00:56
                              Reconnect Power/Cable!
                              
                              

                              Comment

                              casinoslot bahisnow
                              deneme bonusu veren siteler deneme bonusu deneme bonusu veren siteler
                              Mature babe is engulfing dudes cock hungrily girl gone wild first timer Maki Mizusawa enjoying sucking and riding her dude
                              hd sex video
                              Working...
                              X