Announcement

Collapse
No announcement yet.

Post here successfully unlock or IMEI repair Samsung

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Samsung J700F Frp Reset By Z3x Pro..........


    Comment


    • Samsung G531H Frp Reset By Z3x Pro..........



      Comment


      • Samsung J110G Unlock Done By Z3x Pro..........​


        Comment


        • Samsung J106B Unlock Done By Z3x Pro..........​

          Comment


          • Samsung Galaxy A3 ⑥ A310F Unlock Done By Z3x Pro..........​


            Comment


            • samsung j106h unlock no root


              UNLOCK INSTRUCTIONS:
              1. Power on the phone.
              2. Connect the phone to PC with USB cable.
              3. Check Samsung modem in device manager, install drivers if needed.
              4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.

              Operation: Read Codes
              Selected model: SM-J106H
              Software version: 29.0

              Searching Samsung modem... detected COM115
              Reading phone info... OK
              Model: SM-J106H
              Version: J106HJVU0AQB3/J106HOJV0AQB3/J106HJVU0AQB3/J106HJVU0AQB3
              Product code: SM-J106HZWDMID
              Phone SN: RV1J61C3V4A
              IMEI: 358790083811988
              Unique number: C8G010BCAE40E44
              Reading codes... OK
              Please wait, calculating codes... OK (time - 00:01:33)
              Freeze code: 82962072
              NET lock: 92606182
              SUB lock: 00000000
              SP lock: 00000000
              CP lock: 00000000
              SIM lock: 00000000
              For check lock status: *#7465625#
              Done with Samsung Tool PRO v.29.0

              Comment


              • Samsung J700H Frp Reset By Z3x Pro..........


                Comment


                • UNLOCK INSTRUCTIONS:
                  To unlock NEW security type:
                  Phone must be rooted!
                  If the software can't root the phone automatically,
                  then you must root your device manually.
                  1. Power on the phone.
                  2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
                  go to 'Settings'-'Developer options' and enable 'USB debugging'.
                  3. Connect the phone to PC with USB cable, install drivers if needed.
                  4. Select device in ADB settings.
                  5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

                  To unlock OLD security type:
                  1. Power on the phone.
                  2. Connect the phone to PC with USB cable.
                  3. Check Samsung modem in device manager, install drivers if needed.
                  4. Press 'Unlock' button and select 'Unlock' for direct unlock.

                  To read security codes (all security types):
                  1. Power on the phone.
                  2. Connect the phone to PC with USB cable.
                  3. Check Samsung modem in device manager, install drivers if needed.
                  4. Press 'Read codes' button to read security codes.

                  To read security codes via diagnostic port:
                  Warning! Knox warranty must be active (0x00)!
                  If you have it voided (0x01(void)), then you can't use this function.
                  1. Power on the phone.
                  2. Type *#0808# and select 'DM+MODEM+ADB'.
                  3. Connect the phone to PC with USB cable, install drivers if needed.
                  4. Press 'Read Codes DIAG' button to read security codes.

                  To reset Google account activation lock:
                  1. ADB must be activated in any way (you can flash sBoot from combination firmware,
                  make sure, that you are not upgrade sBoot).
                  2. Connect the phone to PC with USB cable, install drivers if needed.
                  3. Select device in ADB settings.
                  4. Press 'Reset FRP' to deactivate Google account activation lock.

                  To reset Google account activation or Samsung reactivation lock:
                  1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
                  2. Connect the phone to PC with USB cable, install drivers if needed.
                  3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
                  (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

                  To reset Google account activation lock with UART cable:
                  1. Phone must be powered off
                  2. Connect the phone to UART cable.
                  3. Select correct COM port in port settings.
                  4. Press 'Reset FRP UFS' and follow the instructions in program.

                  Operation: Reset FRP UFS
                  Selected model: SM-G935F
                  Selected port: COM97 Z3X BOX Serial Port
                  Software version: 31.0

                  Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
                  Checking phone at COM97 OK
                  Phone detected, do not release 'Vol down'
                  Reading data from phone... OK
                  Release 'Vol down' now
                  Comparing selected model... match (G935F)
                  Setup connection... OK
                  Reseting FRP... OK
                  Rebooting phone... OK
                  Reset FRP done

                  Done with Samsung Tool PRO v.31.0
                  ________
                  JONONItelecom?


                  Comment


                  • UNLOCK INSTRUCTIONS:
                    1. Power on the phone.
                    2. Connect the phone to PC with USB cable.
                    3. Check Samsung modem in device manager, install drivers if needed.
                    4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
                    If phone ask codes after unlocking, use:
                    PUK - 12345678
                    PIN - 11111111

                    To reset Google account activation or Samsung reactivation lock:
                    1. ADB must be activated in any way (you can flash sBoot from combination firmware,
                    make sure, that you are not upgrade sBoot).
                    2. Connect the phone to PC with USB cable, install drivers if needed.
                    3. Select device in ADB settings.
                    4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
                    (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

                    Operation: Unlock
                    Selected model: SM-J111F
                    Software version: 31.0

                    Searching Samsung modem... detected COM358
                    Reading phone info... OK
                    Model: SM-J111F
                    Version: J111FXXU0AQI2/J111FOLB0AQI2/J111FXXU0AQE1/J111FXXU0AQI2
                    Product code: SM-J111FZKDXME
                    Phone SN: RV8JC0096JE
                    IMEI: 352621093433263
                    Unique number: CFN007854AA38A4
                    Unlocking... OK
                    Rebooting phone... OK
                    Unlock done

                    Done with Samsung Tool PRO v.31.0
                    ________
                    JONONItelecom?


                    Comment


                    • UNLOCK INSTRUCTIONS:
                      To unlock:
                      Phone must be rooted!
                      If the software can't root the phone automatically,
                      then you must root your device manually.
                      1. Power on the phone.
                      2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
                      go to 'Settings'-'Developer options' and enable 'USB debugging'.
                      3. Connect the phone to PC with USB cable, install drivers if needed.
                      4. Select device in ADB settings.
                      5. Press 'Unlock' for direct unlock.

                      To read security codes:
                      1. Power on the phone.
                      2. Connect the phone to PC with USB cable.
                      3. Check Samsung modem in device manager, install drivers if needed.
                      4. Press 'Read codes' button to read security codes.

                      To read security codes via diagnostic port:
                      Warning! Knox warranty must be active (0x00)!
                      If you have it voided (0x01(void)), then you can't unlock this phone using sever.
                      1. Power on the phone.
                      2. Type *#0808# and select 'DM+MODEM+ADB'.
                      3. Connect the phone to PC with USB cable, install drivers if needed.
                      4. Press 'Read Codes DIAG' button to read security codes.

                      To reset Google account activation or Samsung reactivation lock:
                      1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
                      2. Connect the phone to PC with USB cable, install drivers if needed.
                      3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
                      (Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

                      Operation: Read Codes DIAG
                      Selected model: SM-G610F
                      Software version: 31.0

                      Checking hash file... OK
                      Searching Samsung modem... detected COM636
                      Reading phone info... OK
                      Model: SM-G610F
                      AP version: G610FDDU1BQJ7
                      CSC version: G610FOJV1BQJ7
                      CP version: G610FDDU1BQJ4
                      Product code: KSA
                      Phone SN: R28J70Y070Z
                      Unique number: CAJ035091EEA064
                      Searching Samsung diag port... detected COM638
                      Reading phone info... OK
                      CP version: G610FDDU1BQJ4
                      CP build: Oct 13 2017 19:17:33
                      Reading data from phone... OK
                      Reading NV data... OK
                      Modem board: SHANNON315
                      Checking NV data... OK
                      Calculating... OK
                      Please wait, calculating codes... OK (time - 00:00:08)
                      Freeze code: 71580625
                      NET lock: 58513963
                      SUB lock: 00000000
                      SP lock: 00000000
                      CP lock: 00000000
                      SIM lock: 00000000
                      For check lock status: *#7465625#

                      Done with Samsung Tool PRO v.31.0

                      Comment


                      • UNLOCK INSTRUCTIONS:
                        To unlock NEW security type:
                        Phone must be rooted!
                        If the software can't root the phone automatically,
                        then you must root your device manually.
                        1. Power on the phone.
                        2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
                        go to 'Settings'-'Developer options' and enable 'USB debugging'.
                        3. Connect the phone to PC with USB cable, install drivers if needed.
                        4. Select device in ADB settings.
                        5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

                        To unlock OLD security type:
                        1. Power on the phone.
                        2. Connect the phone to PC with USB cable.
                        3. Check Samsung modem in device manager, install drivers if needed.
                        4. Press 'Unlock' button and select 'Unlock' for direct unlock.

                        To read security codes (all security types):
                        1. Power on the phone.
                        2. Connect the phone to PC with USB cable.
                        3. Check Samsung modem in device manager, install drivers if needed.
                        4. Press 'Read codes' button to read security codes.

                        To read security codes via diagnostic port:
                        1. Power on the phone.
                        2. Type *#0808# and select 'DM+MODEM+ADB'.
                        3. Connect the phone to PC with USB cable, install drivers if needed.
                        4. Press 'Read Codes DIAG' button to read security codes.

                        To reset Google account activation lock:
                        1. ADB must be activated in any way (you can flash sBoot from combination firmware,
                        make sure, that you are not upgrade sBoot).
                        2. Connect the phone to PC with USB cable, install drivers if needed.
                        3. Select device in ADB settings.
                        4. Press 'Reset FRP' and follow the instructions in program.
                        5. When process done, press 'Back' on phone and perform factory reset from phone settings.

                        To reset Google account activation or Samsung reactivation lock:
                        1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
                        2. Connect the phone to PC with USB cable, install drivers if needed.
                        3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
                        4. After phone reboot, go to settings and perform factory reset.

                        To reset Google account activation lock with UART cable:
                        1. Phone must be powered off
                        2. Connect the phone to UART cable.
                        3. Select correct COM port in port settings.
                        4. Press 'Reset FRP UFS' and follow the instructions in program.

                        Operation: Reset FRP UFS
                        Selected model: SM-N920A
                        Selected port: COM93 Z3X BOX Serial Port
                        Software version: 31.0

                        Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
                        Checking phone at COM93 OK
                        Phone detected, do not release 'Vol down'
                        Reading data from phone... OK
                        Release 'Vol down' now
                        Comparing selected model... match (N920A)
                        Setup connection... OK
                        Reseting FRP... OK
                        Rebooting phone... OK
                        Reset FRP done

                        Done with Samsung Tool PRO v.31.0
                        ________
                        JONONItelecom?


                        Comment


                        • UNLOCK INSTRUCTIONS:
                          To unlock NEW security type:
                          Phone must be rooted!
                          If the software can't root the phone automatically,
                          then you must root your device manually.
                          1. Power on the phone.
                          2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
                          go to 'Settings'-'Developer options' and enable 'USB debugging'.
                          3. Connect the phone to PC with USB cable, install drivers if needed.
                          4. Select device in ADB settings.
                          5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

                          To unlock OLD security type:
                          1. Power on the phone.
                          2. Connect the phone to PC with USB cable.
                          3. Check Samsung modem in device manager, install drivers if needed.
                          4. Press 'Unlock' button and select 'Unlock' for direct unlock.

                          To read security codes (all security types):
                          1. Power on the phone.
                          2. Connect the phone to PC with USB cable.
                          3. Check Samsung modem in device manager, install drivers if needed.
                          4. Press 'Read codes' button to read security codes.

                          To read security codes via diagnostic port:
                          1. Power on the phone.
                          2. Type *#0808# and select 'DM+MODEM+ADB'.
                          3. Connect the phone to PC with USB cable, install drivers if needed.
                          4. Press 'Read Codes DIAG' button to read security codes.

                          To reset Google account activation lock:
                          1. ADB must be activated in any way (you can flash sBoot from combination firmware,
                          make sure, that you are not upgrade sBoot).
                          2. Connect the phone to PC with USB cable, install drivers if needed.
                          3. Select device in ADB settings.
                          4. Press 'Reset FRP' and follow the instructions in program.
                          5. When process done, press 'Back' on phone and perform factory reset from phone settings.

                          To reset Google account activation or Samsung reactivation lock:
                          1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
                          2. Connect the phone to PC with USB cable, install drivers if needed.
                          3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
                          4. After phone reboot, go to settings and perform factory reset.

                          To reset Google account activation lock with UART cable:
                          1. Phone must be powered off
                          2. Connect the phone to UART cable.
                          3. Select correct COM port in port settings.
                          4. Press 'Reset FRP UFS' and follow the instructions in program.

                          Operation: Read Codes
                          Selected model: SM-N920A
                          Selected port: COM384 SAMSUNG Mobile USB Serial Port
                          Software version: 31.0

                          Searching Samsung modem... detected COM383
                          Reading phone info... OK
                          Model: SM-N920A
                          AP version: N920AUCS4CPK1
                          CSC version: N920AATT4CPK1
                          CP version: N920AUCS4CPK1
                          Product code: SM-N920AZKAATT
                          Phone SN: R38G802Q7NV
                          Unique number: 0715F7711B4D3E38
                          Reading IMEI... OK
                          IMEI: 353876070703836 (SIGN: NG_SIGN)
                          Checking hash file... OK
                          Reading data from phone... OK
                          Modem board: SHANNON333
                          HWID: 48 B9 B8 6E 56 04 00 00 00 00 00 00 00 00 00 00
                          Reading NV data... OK
                          Checking NV data... OK
                          Calculating... OK
                          Please wait, calculating codes... OK (time - 00:00:07)
                          Freeze code: 90740829
                          NET lock: 52939691
                          SUB lock: 00000000
                          SP lock: 00000000
                          CP lock: 00000000
                          SIM lock: 00000000
                          For check lock status: *#7465625#

                          Done with Samsung Tool PRO v.31.0
                          ________
                          JONONItelecom?


                          Comment


                          • Operation: Reset FRP/React/EE
                            Selected model: SM-G531H/DS
                            Software version: 31.0

                            Searching Samsung USB Flash interface... COM146 detected
                            Setup connection... OK
                            Reading PIT from phone... OK
                            Searching FRP lock... OK
                            Erasing FRP... OK
                            Searching Reactivation lock... not supported
                            Searching EE lock... OK
                            Erasing EE lock... OK
                            Reset done

                            Done with Samsung Tool PRO v.31.0

                            Comment


                            • Operation: Reset FRP/React/EE
                              Selected model: SM-G531H/DS
                              Software version: 31.0

                              Searching Samsung USB Flash interface... COM146 detected
                              Setup connection... OK
                              Reading PIT from phone... OK
                              Searching FRP lock... OK
                              Erasing FRP... OK
                              Searching Reactivation lock... not supported
                              Searching EE lock... OK
                              Erasing EE lock... OK
                              Reset done

                              Done with Samsung Tool PRO v.31.0

                              Comment


                              • Operation: Reset FRP/React/EE
                                Selected model: SM-J210F
                                Software version: 31.0

                                Searching Samsung USB Flash interface... COM146 detected
                                Setup connection... OK
                                Reading PIT from phone... OK
                                Searching FRP lock... OK
                                Erasing FRP lock... OK
                                Reset done
                                For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

                                Done with Samsung Tool PRO v.31.0

                                Comment

                                casinoslot bahisnow
                                deneme bonusu veren siteler deneme bonusu deneme bonusu veren siteler
                                Mature babe is engulfing dudes cock hungrily girl gone wild first timer Maki Mizusawa enjoying sucking and riding her dude
                                hd sex video
                                Working...
                                X