Announcement

Collapse
No announcement yet.

★★Infinity Chinese Miracle-2 Successfully Unlocked / Repaired / Flashed Phones ★★ ��

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    WALTON Primo_EF3 frp solve



    Code:
    Operation : Check/Read Info [ v1.24 ]
    
    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable
    
     ====  Wait for phone...
    
    Phone found! [ 4 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    
    FLASH : eMMC Flash , Structure : Ok!
    
    Reading extended info ... 
    
    Model Name  : Primo_EF3
    Model Brand : Walton
    Model Device: Primo_EF3
    AndrVersion : 5.1
    BaseBand CPU: WALTON
    CompileDate : 2/26/2016 10:26:17 AM
    Project Ver : Walton_Primo_EF3_S07_26_02_2016
    Model Ext   : Primo_EF3
    
    ExtraInfo : HWInfo not exists, normal phone
    
    Elapsed: 00:00:22
    
    Reconnect Power/Cable!
    
    
    Operation : Format File System / Reset Settings [ v1.24 ]
    Settings : SmartFormat is On
    
    1. Remove battery. Insert battery back
    2. Press and hold 'VolumeUp' and 'VolumeDown' keys
    3. Insert cable
    
     ====  Wait for phone...
    
    Phone found! [ 4 ]
    Port Opened
    Sync...
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync...
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds - remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    
    FlashMode Set : Ok!
    Checking Structure ... 
    Detected eMMC Flash , Structure detect Ok!
    
    eMMC phone detected! Will use 'Safe Format' mode!
    
    Mount : /data
    Size  : 0x000000015E5F7000
    State : 0x0001
    
    Mount : /cache
    Size  : 0x0000000009600000
    State : 0x0001
    
    Prepare Ok! Format Ok!
    Don't touch phone, until it fully bootup to "Welcome Screen"!
    
    Done!
    
    Elapsed: 00:00:23
    
    Reconnect Power/Cable!

    Comment


    • #32
      Symphony W72 Unfortunately Has Stopped Google Play Problem Solve With Cm2



      Code:
      Scatter Load Ok , BaseBand : MT6572 , Project : konka72_i150 , Storage : EMMC
      Files found : 11 , Set to Flash : 10
      Ready to Flash!
      
      Operation : Flash [ v1.58 ]
      
      ======= Flash
      1. Power Off Phone , Remove battery , Insert back
      2. Insert USB cable. In some cases require hold BootKey
      
      Wait for phone...
      Phone found! [ 5 ]
      Sync...
      Inital Boot Ok!
      BB_CPU_PID : 6572
      BB_CPU_NME : [MediaTek] MT6572_S00
      BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
      Processing BROM stage
      Settings for BROM configured!
      SecCfgVal : 0x00000000
      BromVer   : 0x00FF
      BLVersion : 0x0001
      PreLoader : Active [ Boot with PL ]
      BootLdrSS : NORMAL with PRELOADER
      Processing DA stage
      DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
      Sending and initialize DA ...
      Running DA ver.4.2 on BBID : 0x88
      NAND Flash : NOT INSTALLED
      eMMC Flash : 1501004E35575A4D4201EE75C2FEB0AF
      Initialize Memory ... 
      DRAM already initialized by Preloader
      DAgent sent , init HW now
      eMMC FlashIC initialized
      [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
      [eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
      [eMMC] : FLASH_CID : 1501004E35575A4D4201EE75C2FEB0AF
      [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
      [eMMC] : FLASH_LEN : 0x00000000E9000000
      [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
      DEV RID    : 0xDA9F1AB73E32DBEF85852EF2234FCAC5
      INT RAM    : 0x00020000
      EXT RAM    : 0x20000000 [512 MiB]
      BOOT TYPE  : EMMC_FLASH_BOOT
      SOC VERIFY : C1
      Boot Ok!
      
      ScatCFG : BaseBand : MT6572 , Project : konka72_i150 , Storage : EMMC
      Setting : Flash Pre-Erase (Safe) : Enabled
      Setting : AFF verify :  Disabled
      Setting : HW verify :  Disabled
      
      BL : Check HW compatibility
      BL : BBID supported by BootLoader!
      BL : Skip checking by User request!
      
      BL : BatteryLevel : 3754 mV
      BL : BatteryLevel Ok
      
      BL : Flash Pre-Erase
      Total blocks to Erase : 2
      Erase : 0x0000000000600000-0x0000000000100000
      Erase : 0x0000000002300000-0x000000009AC40000
      Flash Pre-Erase Done, time used : 00:00:01
      
      SecCfg Passed , 1799
      BMT remark not need. Will skip
      Sending Preloader ... 
      Use : preloader_konka72_i150.bin
      Preloader Sent , Init passed
      SecCfg Passed , 1799
      PartCount : 0013
      Update PMT by user request
      Repartition Done!
      Use FLN Mode
      
      Processing : Flash Write
      Flash now : MBR
      Image Flash Ok
      Flash now : EBR1
      Image Flash Ok
      Flash now : UBOOT
      Image Flash Ok
      Flash now : BOOTIMG
      Image Flash Ok
      Flash now : RECOVERY
      Image Flash Ok
      Flash now : SEC_RO
      Image Flash Ok
      Flash now : LOGO
      Image Flash Ok
      Flash now : ANDROID
      Image Flash Ok
      Flash now : CACHE
      Image Flash Ok
      Flash now : USRDATA
      Image Flash Ok
      Flash Write Done, time used : 00:03:14
      
      
      Update Mirror PMT
      Update Done!
      
      Update RomInfo done
      
      Done!
      Elapsed: 00:03:31
      Reconnect Power/Cable!
      

      Comment


      • #33
        Symphony W72 Unfortunately Has Stopped Google Play Problem Solve With Cm2



        Code:
        Scatter Load Ok , BaseBand : MT6572 , Project : konka72_i150 , Storage : EMMC
        Files found : 11 , Set to Flash : 10
        Ready to Flash!
        
        Operation : Flash [ v1.58 ]
        
        ======= Flash
        1. Power Off Phone , Remove battery , Insert back
        2. Insert USB cable. In some cases require hold BootKey
        
        Wait for phone...
        Phone found! [ 5 ]
        Sync...
        Inital Boot Ok!
        BB_CPU_PID : 6572
        BB_CPU_NME : [MediaTek] MT6572_S00
        BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
        Processing BROM stage
        Settings for BROM configured!
        SecCfgVal : 0x00000000
        BromVer   : 0x00FF
        BLVersion : 0x0001
        PreLoader : Active [ Boot with PL ]
        BootLdrSS : NORMAL with PRELOADER
        Processing DA stage
        DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
        Sending and initialize DA ...
        Running DA ver.4.2 on BBID : 0x88
        NAND Flash : NOT INSTALLED
        eMMC Flash : 1501004E35575A4D4201EE75C2FEB0AF
        Initialize Memory ... 
        DRAM already initialized by Preloader
        DAgent sent , init HW now
        eMMC FlashIC initialized
        [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
        [eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
        [eMMC] : FLASH_CID : 1501004E35575A4D4201EE75C2FEB0AF
        [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
        [eMMC] : FLASH_LEN : 0x00000000E9000000
        [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
        DEV RID    : 0xDA9F1AB73E32DBEF85852EF2234FCAC5
        INT RAM    : 0x00020000
        EXT RAM    : 0x20000000 [512 MiB]
        BOOT TYPE  : EMMC_FLASH_BOOT
        SOC VERIFY : C1
        Boot Ok!
        
        ScatCFG : BaseBand : MT6572 , Project : konka72_i150 , Storage : EMMC
        Setting : Flash Pre-Erase (Safe) : Enabled
        Setting : AFF verify :  Disabled
        Setting : HW verify :  Disabled
        
        BL : Check HW compatibility
        BL : BBID supported by BootLoader!
        BL : Skip checking by User request!
        
        BL : BatteryLevel : 3754 mV
        BL : BatteryLevel Ok
        
        BL : Flash Pre-Erase
        Total blocks to Erase : 2
        Erase : 0x0000000000600000-0x0000000000100000
        Erase : 0x0000000002300000-0x000000009AC40000
        Flash Pre-Erase Done, time used : 00:00:01
        
        SecCfg Passed , 1799
        BMT remark not need. Will skip
        Sending Preloader ... 
        Use : preloader_konka72_i150.bin
        Preloader Sent , Init passed
        SecCfg Passed , 1799
        PartCount : 0013
        Update PMT by user request
        Repartition Done!
        Use FLN Mode
        
        Processing : Flash Write
        Flash now : MBR
        Image Flash Ok
        Flash now : EBR1
        Image Flash Ok
        Flash now : UBOOT
        Image Flash Ok
        Flash now : BOOTIMG
        Image Flash Ok
        Flash now : RECOVERY
        Image Flash Ok
        Flash now : SEC_RO
        Image Flash Ok
        Flash now : LOGO
        Image Flash Ok
        Flash now : ANDROID
        Image Flash Ok
        Flash now : CACHE
        Image Flash Ok
        Flash now : USRDATA
        Image Flash Ok
        Flash Write Done, time used : 00:03:14
        
        
        Update Mirror PMT
        Update Done!
        
        Update RomInfo done
        
        Done!
        Elapsed: 00:03:31
        Reconnect Power/Cable!
        

        Comment


        • #34
          Kingstar KS A1Plus Hang on Logo Solve By Cm2



          Code:
          Operation : Check/Read Info [ v1.24 ]
          
          1. Remove battery. Insert battery back
          2. Press and hold 'VolumeUp' and 'VolumeDown' keys
          3. Insert cable
          
           ====  Wait for phone...
          
          Phone found! [ 8 ]
          Port Opened
          Sync...
          InitBoot Done [ 0x81 ] , Ver : SPRD3
          Sync...
          Sending FDL
          [Info] : If SW freeze here more, than 15 seconds - remove cable
          FDL Ready!
          Boot Ver : SPRD 773x eMMC loader v3 Infinity
          Sending FLASH FDL
          FLASH FDL Ready!
          Boot Ok!
          
          FLASH : eMMC Flash , Structure : Ok!
          
          Reading extended info ... 
          
          Model Name  : scx35_sp7731geaplus_dt
          Model Brand : Kingstar
          Model Device: scx35_sp7731gea
          AndrVersion : 4.4.2
          BaseBand CPU: SP7731GEA
          CompileDate : 8/24/2015 7:17:58 AM
          Project Ver : Kingstar KS A1Plus_SW_V4.0_20150820
          Model Ext   : KS A1Plus
          
          ExtraInfo : HWInfo not exists, normal phone
          
          Elapsed: 00:00:19
          
          Reconnect Power/Cable!
          
          
          Operation : Format File System / Reset Settings [ v1.24 ]
          Settings : SmartFormat is On
          
          1. Remove battery. Insert battery back
          2. Press and hold 'VolumeUp' and 'VolumeDown' keys
          3. Insert cable
          
           ====  Wait for phone...
          
          Phone found! [ 8 ]
          Port Opened
          Sync...
          InitBoot Done [ 0x81 ] , Ver : SPRD3
          Sync...
          Sending FDL
          [Info] : If SW freeze here more, than 15 seconds - remove cable
          FDL Ready!
          Boot Ver : SPRD 773x eMMC loader v3 Infinity
          Sending FLASH FDL
          FLASH FDL Ready!
          Boot Ok!
          
          FlashMode Set : Ok!
          Checking Structure ... 
          Detected eMMC Flash , Structure detect Ok!
          
          eMMC phone detected! Will use 'Safe Format' mode!
          
          Mount : /data
          Size  : 0x000000005DBFB000
          State : 0x0001
          
          Mount : /cache
          Size  : 0x0000000009600000
          State : 0x0001
          
          Prepare Ok! Format Ok!
          Don't touch phone, until it fully bootup to "Welcome Screen"!
          
          Done!
          
          Elapsed: 00:00:27
          
          Reconnect Power/Cable!

          Comment


          • #35
            ALCATEL_ONE_TOUCH_7047E Pattern lock Remove Done





            Code:
            Operation : Check / Read Info [ v1.58 ]
            
            1. Power Off Phone , Remove battery , Insert back
            2. Insert USB cable. In some cases require hold BootKey
            
            Wait for phone...
            Phone found! [ 16 ]
            Sync...
            Inital Boot Ok!
            BB_CPU_PID : 6582
            BB_CPU_NME : [MediaTek] MT6582_S00
            BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
            Processing BROM stage
            Settings for BROM configured!
            SecCfgVal : 0x00000000
            BromVer   : 0x00FF
            BLVersion : 0x0001
            PreLoader : Active [ Boot with PL ]
            BootLdrSS : NORMAL with PRELOADER
            Processing DA stage
            DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
            Sending and initialize DA ...
            Running DA ver.4.2 on BBID : 0x87
            NAND Flash : NOT INSTALLED
            eMMC Flash : FE014E50305858585810843E00971187
            Initialize Memory ... 
            DRAM already initialized by Preloader
            DAgent sent , init HW now
            eMMC FlashIC initialized
            [eMMC] : FLASH_VEN : 0xFE , OEM : 014E
            [eMMC] : FLASH_INF : [MICRON] , XXXX0
            [eMMC] : FLASH_CID : FE014E50305858585810843E00971187
            [eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
            [eMMC] : FLASH_LEN : 0x00000000E9000000
            [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
            DEV RID    : 0xDA9F1AB755E2CF8CFDFFA6D1CE0911A0
            INT RAM    : 0x00020000
            EXT RAM    : 0x40000000 [1 GiB]
            BOOT TYPE  : EMMC_FLASH_BOOT
            SOC VERIFY : C1
            Boot Ok!
            
            [AP] : Initial info read Ok!
            
            Brand     : TCT
            ProdName  : ALCATEL_ONE_TOUCH_7047E
            ProdModel : ALCATEL ONE TOUCH 7047E
            Device    : YARIS_55
            AndroidVer: 4.2.2
            MTKxCPU   : MT6582
            MTKxPRJ   : ALPS.JB5.MP.V1.1
            
            Done!
            Elapsed: 00:00:39
            Reconnect Power/Cable!
            
            
            Operation : Format FileSystem [ v1.58 ]
            
            1. Power Off Phone , Remove battery , Insert back
            2. Insert USB cable. In some cases require hold BootKey
            
            Wait for phone...
            Phone found! [ 16 ]
            Sync...
            Inital Boot Ok!
            BB_CPU_PID : 6582
            BB_CPU_NME : [MediaTek] MT6582_S00
            BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
            Processing BROM stage
            Settings for BROM configured!
            SecCfgVal : 0x00000000
            BromVer   : 0x00FF
            BLVersion : 0x0001
            PreLoader : Active [ Boot with PL ]
            BootLdrSS : NORMAL with PRELOADER
            Processing DA stage
            DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
            Sending and initialize DA ...
            Running DA ver.4.2 on BBID : 0x87
            NAND Flash : NOT INSTALLED
            eMMC Flash : FE014E50305858585810843E00971187
            Initialize Memory ... 
            DRAM already initialized by Preloader
            DAgent sent , init HW now
            eMMC FlashIC initialized
            [eMMC] : FLASH_VEN : 0xFE , OEM : 014E
            [eMMC] : FLASH_INF : [MICRON] , XXXX0
            [eMMC] : FLASH_CID : FE014E50305858585810843E00971187
            [eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
            [eMMC] : FLASH_LEN : 0x00000000E9000000
            [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
            DEV RID    : 0xDA9F1AB755E2CF8CFDFFA6D1CE0911A0
            INT RAM    : 0x00020000
            EXT RAM    : 0x40000000 [1 GiB]
            BOOT TYPE  : EMMC_FLASH_BOOT
            SOC VERIFY : C1
            Boot Ok!
            
            
            Clear USERDATA
            Clear Ok!
            Clear CACHE
            Clear Ok!
            
            Done!
            Elapsed: 00:00:35
            Reconnect Power/Cable!

            Comment


            • #36
              LG G3 F400L Format By Cm2

              info

              Code:
              Operation : Identify [ v1.02 ]
              
              1. Power Off Phone , Remove battery , Insert back
              2. PRESS and HOLD VOLUME UP KEY!
              3. Insert USB cable, wait until Download mode screen will appear
              
              Wait for phone...
              Connection opened successfully!
              Waiting for loader ... 
              Handshake passed!
              Collect info... 
              
              Running : MiniOS 3.0 , ver.1.0 , with proto ver.01000001
              HWInfo  : BaseBand : MSM8974
              HWInfo  : ChargeLv : 38%
              HWInfo  : MEM_INFO : 032GE4 , MEM_LEN : 0x03A3E000 [eMMC 32 GiB]
              DevInfo : Model : LG-F400L , Type : F400L11a
              DevInfo : ANDROID 4.4.2
              DevInfo :   PSN : PT01S150105001741 , PID : LGF400La330b9b6
              DevInfo : IMEI  : 353168062743883
              DevInfo : SecMode : S , Build : U , RCT : 000F4240
              SWInfo  : SWver : V11a , SW : LGF400LAT-00-V11a-LGU-KR-AUG-05-2015+0
              SWInfo  : FacSW : LGF400LAT-00-V11a-LGU-KR-AUG-05-2015+0
              RegInfo : Region : KR , Provider : LGU
              
              Prepare passed, mode 0x00
              Boot done!
              
              
              Brand     : lge
              ProdName  : g3_lgu_kr
              ProdModel : LG-F400L
              Device    : g3
              AndroidVer: 4.4.2
              SWVersion : LGF400LAT-00-V11a-LGU-KR-AUG-05-2015+0
              Manufact. : LGE
              LGMxCPU   : MSM8974
              
              Done!
              Elapsed: 00:01:15
              
              Operation : Reset Settings/Format FS [ v1.02 ]
              
              1. Power Off Phone , Remove battery , Insert back
              2. PRESS and HOLD VOLUME UP KEY!
              3. Insert USB cable, wait until Download mode screen will appear
              
              Wait for phone...
              Connection opened successfully!
              Waiting for loader ... 
              Handshake passed!
              Collect info... 
              Prepare passed, mode 0x00
              Boot done!
              
              Format UserData
              Format Cache
              Format done
              
              Reconnect Power/Cable!
              
              Done!
              Elapsed: 00:01:19

              Comment


              • #37
                Card found : 5AC06F78 , v0136
                Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.15


                Operation : Reset Settings [ v1.15 ]

                1. Power Off Phone , Remove battery , Insert back
                2. PRESS and HOLD BOTH VOLUME KEYS!
                3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

                Wait for phone...
                Device Found!
                Initialize ...
                Handshake passed!
                BB_IDC_CPU : SnapDragon 430 [MSM8937]
                ID_BLOCK_S : 23630E60
                ID_BLOCK_I : 0004F0E1
                ID_BLOCK_L : 5C5ABF839D1B37B0F916AFA92F0ED321
                ID_BLOCK_L : 654F38BCA0559FDECC8F5FB613E90827
                Use CM2 Internal Loader
                Loader Sent! Initializing ...
                Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
                MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
                ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
                Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RC14MB
                Boot Ok!

                Format USER ...
                Format CACHE ...
                Format Ok!
                Remove FRP
                Reset Ok!

                Done!
                Elapsed: 00:00:18

                Reconnect Power/Cable!

                Comment


                • #38
                  Symphony L100 Hang On Logo Solve

                  Symphony L100 Hang On Logo Solve

                  Br...
                  Emmc _Solution

                  Comment


                  • #39
                    lava iris 65 frp reset by cm2


                    Operation : Reset Settings/Format FS [ v2.00 r4 ]

                    1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
                    2. Insert USB cable in phone
                    Waiting for device connection ...

                    PTFN : MediaTek PreLoader USB VCOM (Android) (COM8)
                    MODE : PRELOADER PORT
                    PORT : 8
                    Waiting BOOT ack ...
                    PRELOADER : ACK confirmed!
                    BROM : Init BROM
                    BROM init passed!
                    CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
                    TYPE : MODERN RAPHAEL
                    BROM : SecLevel : 0x00000000
                    BROM : SecMode : PLAIN [+PRL]
                    BROM : PRELOADER PORT
                    MODE : 0_base : BASE_v1812 | Manual : Disabled
                    AGENT : Look for suitable BootChain in DA ...
                    AGENT : MTK_AllInOne_DA.bin
                    AGENT : Found MT6739
                    AGENT : MTK_DOWNLOAD_AGENT
                    BROM : Sending 1st DA ...
                    BROM : DA sent
                    BROM :Transfer control to DA ...
                    DA : AGENT started!
                    DA : SYNC
                    DA : MODE : PRELOADER
                    DA : EXT_RAM initialized!
                    DA : BOOT to 2nd DA ...
                    DA : 2ND stage confirmed!
                    DA : SYNC with DA passed!
                    DA : Receiving HW info

                    SRAM: 0x00020000 [ 128.00 KB ]
                    DRAM: 0x40000000 [ 1.00 GB ]

                    EMMC: 150100464E36324D42039F6ACCF555CF
                    EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FN62MB
                    EMMC:
                    BOOT1 : 0x00400000 [ 4.00 MB ]
                    BOOT2 : 0x00400000 [ 4.00 MB ]
                    RPMB : 0x00080000 [ 512.00 KB ]
                    USER : 0x1D2000000 [ 7.28 GB ]

                    CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

                    RNID : 1722DE96B99AD1CD2C00D01F72D57980

                    DA : USB : HIGH-SPEED

                    Boot done!

                    Format Ok : RESET PROTECTION

                    Done!
                    Elapsed: 00:00:11

                    Reconnect Power/Cable!

                    Comment


                    • #40
                      walton gm3+ frp remove done

                      Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.00 r4

                      Operation : Reset Settings/Format FS [ v2.00 r4 ]

                      1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
                      2. Insert USB cable in phone
                      Waiting for device connection ...

                      PTFN : MediaTek PreLoader USB VCOM (Android) (COM8)
                      MODE : PRELOADER PORT
                      PORT : 8
                      Waiting BOOT ack ...
                      PRELOADER : ACK confirmed!
                      BROM : Init BROM
                      BROM init passed!
                      CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
                      TYPE : MODERN RAPHAEL
                      BROM : SecLevel : 0x00000000
                      BROM : SecMode : PLAIN [+PRL]
                      BROM : PRELOADER PORT
                      MODE : 0_base : BASE_v1812 | Manual : Disabled
                      AGENT : Look for suitable BootChain in DA ...
                      AGENT : MTK_AllInOne_DA.bin
                      AGENT : Found MT6739
                      AGENT : MTK_DOWNLOAD_AGENT
                      BROM : Sending 1st DA ...
                      BROM : DA sent
                      BROM :Transfer control to DA ...
                      DA : AGENT started!
                      DA : SYNC
                      DA : MODE : PRELOADER
                      DA : EXT_RAM initialized!
                      DA : BOOT to 2nd DA ...
                      DA : 2ND stage confirmed!
                      DA : SYNC with DA passed!
                      DA : Receiving HW info

                      SRAM: 0x00020000 [ 128.00 KB ]
                      DRAM: 0x80000000 [ 2.00 GB ]

                      EMMC: 150100514536334D42039F196C81509
                      EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
                      EMMC:
                      BOOT1 : 0x00400000 [ 4.00 MB ]
                      BOOT2 : 0x00400000 [ 4.00 MB ]
                      RPMB : 0x00400000 [ 4.00 MB ]
                      USER : 0x3A3E00000 [ 14.56 GB ]

                      CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

                      RNID : F809C73A6A618919F437B9C4373D1118

                      DA : USB : HIGH-SPEED

                      Boot done!

                      Format Ok : RESET PROTECTION

                      Done!
                      Elapsed: 00:00:15

                      Reconnect Power/Cable!

                      Comment


                      • #41
                        itel Alpha W5503FRP Frp Remove Done One Click

                        Comment

                        casinoslot bahisnow
                        deneme bonusu veren siteler deneme bonusu deneme bonusu veren siteler
                        Mature babe is engulfing dudes cock hungrily girl gone wild first timer Maki Mizusawa enjoying sucking and riding her dude
                        hd sex video
                        Working...
                        X