Announcement

Collapse
No announcement yet.

HUAWEI LUA-U22 Dead Recover

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HUAWEI LUA-U22 Dead Recover


    Huawei LUA-U22 Dead Recover with cm2 |

    Thanks Gsm Society Admin


    Code:
    Scatter Load Ok , BaseBand : MT6582 , Project : wt96582_s96582aa51 , Storage : EMMC
    Files found : 13 , Set to Flash : 12
    Ready to Flash!
    
    Operation : Flash [ v1.58 ]
    
    ======= Flash
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 189 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A483847316505073577A18153DD
    Initialize Memory ... 
    DRAM configured from ScatFW!
    DRAM initialize passed!
    DRAM size : 0x40000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , e1G8
    [eMMC] : FLASH_CID : 90014A483847316505073577A18153DD
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : 0xCD132EE0E90E8F0014D4DF0EC2597EA4
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000 [1 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    ScatCFG : BaseBand : MT6582 , Project : wt96582_s96582aa51 , Storage : EMMC
    Setting : Flash Pre-Erase : Off ( Write Flash Only )
    Setting : AFF verify :  Enabled
    Setting : HW verify :  Enabled
    
    Switching to HSUSB
    HSUSB Init Ok
    BL : Check HW compatibility
    BL : BBID supported by BootLoader!
    BL : Check eMMC compatibility
    BL : eMMC supported by BootLoader!
    
    BL : BatteryLevel : 3767 mV
    BL : BatteryLevel Ok
    
    SecCfg Passed , 179A
    BMT remark not need. Will skip
    Sending Preloader ... 
    Use : preloader_wt96582_s96582aa51.bin
    Preloader Sent , Init passed
    SecCfg Passed , 179A
    PartCount : FFFFFFFF
    PartErr : Not initialized , will update PMT now ... 
    Repartition Done!
    Use FLS Mode
    
    Processing : Flash Write
    Flash now : MBR
    Image Flash Ok
    Flash now : EBR1
    Image Flash Ok
    Flash now : UBOOT
    Image Flash Ok
    Flash now : BOOTIMG
    Image Flash Ok
    Flash now : RECOVERY
    Image Flash Ok
    Flash now : SEC_RO
    Image Flash Ok
    Flash now : LOGO
    Image Flash Ok
    Flash now : EBR2
    Image Flash Ok
    Flash now : CUSTOM
    Image Flash Ok
    Flash now : ANDROID
    Image Flash Ok
    Flash now : CACHE
    Image Flash Ok
    Flash now : USRDATA
    Image Flash Ok
    Flash Write Done, time used : 00:05:32
    
    Processing : Verify
    Verify Passed : MBR
    Verify Passed : EBR1
    Verify Passed : UBOOT
    Verify Passed : BOOTIMG
    Verify Passed : RECOVERY
    Verify Passed : SEC_RO
    Verify Passed : LOGO
    Verify Passed : EBR2
    Verify Passed : CUSTOM
    Verify Passed : ANDROID
    Verify Passed : CACHE
    Verify Passed : USRDATA
    Data Verify Done, time used : 00:02:06
    
    Update Mirror PMT
    Update Done!
    
    Update RomInfo done
    
    Done!
    Elapsed: 00:08:22
    Reconnect Power/Cable!
    Best Regards
    Follow Rules :D
    Kashi Lucky

Working...
X